cat.8100y aluminum electrolytic capacitors hm series low impedance, for pc motherboard lower impedance than hd,hc series. compliant to the rohs directive (2002/95/ec). please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. hm hn low impedance 8 11.5 8 11.5 8 15 10 12.5 8 11.5 8 15 10 12.5 8 20 10 16 10 16 8 20 10 20 8 20 10 16 10 20 10 25 12.5 20 10 20 12.5 25 16 25 18 25 specifications radial lead type type numbering system (example : 6.3v 1800 f) performance characteristics ltem 0.22 0.19 0.16 category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current stability at low temperature endurance marking 40 to +105 ? c 6.3 to 16v 330 to 12000 f 20% (120hz, 20 ? c) after 2 minutes' application of rated voltage, leakage current is less than 0.03cv for capacitance of more than 1000 f, add 0.02 for every increase of 1000 f rated voltage (v) rated voltage (v) tan (max.) impedance ratio zt / z20 (max.) z 40 ? c / z+20 ? c 6.3 10 16 6.3 333 10 16 printed with white color black sleeve. capacitance change within 25% of the initial capacitance value tan 200% or less than the initial specified value leakage current less than or equal to the initial specified value 120hz 20 ? c 120hz standard ratings v (code) 6.3 (0j) 10 (1a) 16 (1c) case size d l (mm) case size d l (mm) impedance (m ? ) max. 20 ? c / 100khz impedance (m ? ) max. 20 ? c / 100khz rated ripple (marms) 105 ? c / 100khz rated ripple (marms) 105 ? c / 100khz case size d l (mm) impedance (m ? ) max. 20 ? c / 100khz rated ripple (marms) 105 ? c / 100khz item cap.( f) code u 1 h 2 m 3 0 4 j 5 1 6 8 7 2 8 m 9 p 10 d 11 12 capacitance tolerance ( 20%) rated capacitance (1800 f) rated voltage (6.3v) configuration size code series name type 330 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 5600 6800 8200 12000 331 471 561 681 821 102 122 152 182 222 272 332 562 682 822 123 30 30 28 25 30 28 25 16 18 19 16 13 16 18 13 12 11 13 10 9 8 1140 1140 1490 1540 1140 1490 1540 1950 2000 2000 1950 2550 1950 2000 2550 2800 3000 2550 2900 3070 3250 8 11.5 8 11.5 10 12.5 10 12.5 8 15 10 16 8 20 10 16 8 20 10 20 10 25 12.5 20 12.5 25 16 25 18 25 30 30 25 25 28 18 18 18 18 13 12 11 10 9 8 1140 1140 1540 1540 1490 2000 1870 2000 1870 2550 2800 3000 2900 3070 3250 8 11.5 8 11.5 10 12.5 10 12.5 8 15 8 20 10 16 10 16 8 20 10 20 10 20 10 25 12.5 20 12.5 25 16 25 18 25 30 30 25 25 28 18 18 18 18 13 13 12 11 10 9 8 1140 1140 1540 1540 1490 1870 2000 2000 1870 2550 2550 2800 2800 2900 3070 3250 d 8 10 pb-free leadwire pb-free pet sleeve pd 12.5 to 18 hd configuration d p d 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 (mm) l + 1.5 m a x . 15 min 4 min d + 0.5 max. pressure relief vent d sleeve (p.e.t.) the specifications listed at right shall be met when the capacitors are restored to 20 ? c after d.c. bias plus rated ripple current is applied for 2000 hours at 105 ? c, the peak voltage shall not exceed the rated voltage. tangent of loss angle (tan ) p 0.5 wider range of rating. hd low impedance : in this case, will be put at 12th digit of type numbering system. : in this case, will be put at 12th digit of type numbering system. : in this case, will be put at 12th digit of type numbering system. 9 3 6 please refer to page 20 about the end seal configulation.
|
